- Drawing View Properties
The Drawing View Properties dialog box provides information about the drawing view and its associated model.
- Controlling the Update Behavior of Drawing Views
You can control the update behavior of views in a drawing.
- Out-of-Date Drawing Views
You can add annotations and dimensions to out-of-date drawing views and attach these annotations and dimensions to the model geometry within the out-of-date views.
- Move Drawing
You can move all of the entities of a drawing in relation to the drawing sheet. Entities that are on the drawing sheet (drawing views, annotations, and so on) or in the drawing sheet format are moved.
- Moving Drawing Views
- Aligning Views
You can change the alignment of views that are not aligned by default, or views whose alignment you have broken. You can also break view alignments and return alignments to their defaults.
- Overriding Alignments
- First Angle and Third Angle Projection
- 3D Drawing View Mode
3D drawing view mode lets you rotate a drawing view out of its plane so you can see components or edges obscured by other entities. The 3D drawing view causes temporary changes to a drawing view. It is used to make geometry selection in a drawing view easier.
- View Orientation
- Copying and Pasting Views
- Rotating Views
You can rotate drawing views on a sheet, or you can rotate a drawing view out of its plane using 3D drawing view mode. You can rotate a view to orient a selected edge either horizontally or vertically. You can also rotate a view around its center point to orient the view at any angle.