Sketch Chamfer PropertyManager

To open the Sketch Chamfer PropertyManager:

In an open sketch, click Sketch Chamfer Tool_Sketch_Chamfer_Sketch.gif on the Sketch toolbar, or click Tools > Sketch Tools > Chamfer.

Chamfer Parameters

Angle-distance

Distance 1 PM_distance1.gif

Applied to the first sketch entity selected.

Direction 1 Angle PM_angle.gif

Applied from the first sketch entity toward the second.
Distance-distance
  • Equal distance selected. Distance 1 PM_distance1.gif is applied to both sketch entities.
  • Equal distance cleared. Distance 1 PM_distance1.gif is applied to the first sketch entity selected. Distance 2 is applied to the second sketch entity selected.
Angle-distance Distance-distance Equal distance
chamfer_angle-distance.gif chamfer_distance-distance.gif chamfer_distance-distance_equal.gif