Useful Links

Varying a Fin's Direction

You can position two fins in varying directions, such as on opposite sides of a corner.

If there are more than two fins, specify a direction for the first fin. The software equally spaces the remaining fins from the direction of the first fin.

To align the fins along the adjoining sides of a corner:

Select a face or edge adjoining the corner for the first fin.
The face is listed in Select a direction vector.
Set Number of Fins to 2.
Clear Equally Spaced.
Another option for Select a direction vector appears.
Select a face or edge on the opposite side of the corner to position the second fin.
Click .