Creating a Simple Hole

To create and position a simple hole:

  1. Select a planar face on which to create the hole.
  2. Click Simple Hole (Sheet Metal toolbar) or Insert > Features > Simple Hole.
  3. In the PropertyManager, set the options.
  4. Click OK to create the simple hole.
  5. Right-click the hole feature in the model or the FeatureManager design tree, and select Edit Sketch.
  6. Add dimensions to position the hole. You can also modify the hole diameter in the sketch.
  7. Exit the sketch or click Rebuild .
  8. To change the diameter, depth, or type of the hole, right-click the hole feature in the model or the FeatureManager design tree, and select Edit Feature. Make the required changes in the PropertyManager, and click .