Replacing Sketches of Projected Curves

You can replace one or more of the sketches that make up a projected curve of two sketches projected onto one another.

1. Right-click the Curve feature in the FeatureManager design tree, or right-click the curve in the graphics area, and select Edit Feature .
   The Curve PropertyManager appears.
2. Choose one of the following methods to clear the unwanted sketch from the Sketch to Project box:
   • Click the sketch in the flyout FeatureManager design tree.
   • Click the sketch in the graphics area.
   • Select the sketch in the Sketch to Project box under Selections, and press Delete.
3. Select the replacement sketch in either the flyout FeatureManager design tree or in the graphics area, then click .