Creating a Corner Trim

The Corner-Trim tool cuts or adds material to flattened sheet metal parts on an edge or a face.

1. Create a sheet metal part.
2. Click Corner-Trim (Sheet Metal toolbar) or click Insert > Sheet Metal > Corner Trim.
3. In the Corner-Trim PropertyManager, set the following under Relief Options:
   1. Select edges for Corner edges .
   2. Click Collect all corners.
   3. Select a value for Relief Type.
   4. Select or clear Centered on bend lines.
   5. Set a value for Radius or Side length.
   6. Select Ratio to thickness to set a value.
   7. Select Tangent to bend.
   8. Select Add filleted corners to set a value for Radius .
4. Click .