Creating Linear Sketch Patterns

To create a linear sketch pattern:

In an open sketch, click Linear Sketch Pattern (Sketch toolbar) or Tools > Sketch Tools > Linear Pattern.
In the PropertyManager, under Entities to Pattern, select the sketch entities to pattern .
Set values for Direction 1 (X-axis).
1. Click Reverse direction .
2. Set Spacing between sketch entities.
3. Select Dimension X spacing to display a dimension between entities.
4. Set Number of sketch entities.
5. Select Display instance count to show the number of instances in the pattern.
6. Set Angle at which to pattern the sketch entities.
Change the distance and angle of the pattern by dragging the selection point .
Repeat for Direction 2 (Y-axis). You can also select Dimension angle between axes to display the dimension for the angle between the patterns.

If you select a model edge to define Direction 1, then Direction 2 is activated. Otherwise you must manually select Direction 2 to activate it.
Click .