Two Member PropertyManager
To open the Two Member PropertyManager:
- In the FeatureManager design tree, expand Corner Management
.
- Right-click Two Member Corner Group and select Edit Feature.
In the graphics area, each green handle on the model represents a corner group. When you select a blue handle, the corner group highlights in the PropertyManager.
Corners
Lists corners or groups of similar corners.
Similar Corners
Group Similar Corners lets
you group similar corners and apply a corner treatment to the group. You can add or
remove corners from a group.
Similar Corners is available when you select a corner from the
list.
Corner Treatment
Displays the options related to Corner Treatment.
| End Butt1 | Trim type. Swaps the tool and body to trim. | |
| End Butt2 | Trim type. Swaps the tool and body to
trim. Trim
tool available in the graphics area also lets
you swap the tool and body to trim.
|
|
| Planar Trim | End butt trim option. Cuts the intersecting member with a plane. | |
| Body Trim | End butt trim option. Conforms the intersecting member to the shape of adjacent faces by adding or removing material. | |
| Miter Trim | Trim type. Trims the members at a 45º angle. | |
| Open corner | Trim type. Trims both members and creates an open corner. | |
| Trim Tool | Automatic trims the target based on the selection of planar trim options. User Defined lets you select the face or plane to trim. | |
| Full Contact planar trim | Default planar trim option. Trims the member flush with adjacent faces. | |
| First Contact planar trim | Planar trim option. Trims the member when it first comes into contact with adjacent faces. | |
| Miter trim plane point | Selects a point from the graphics area to create the miter trim through the selected point. | |
| Gap | Adds a gap between members. | |
| Allow Extension | Extends the structural members. |