Primary Member PropertyManager

Adds members defined by sketch entities, points, reference planes, and surfaces.

To open the Primary Member PropertyManager:

Path Segment

Creates a member along a sketch entity. Select one or more sketch entities (similar to weldments). You can also select model edges for path segments.

Path Segments

Select path segments in sketch.

Creates a member along the intersection of two or more planes.

Start and End Plane	Defines the length of the members.
Plane Set 1
Plane Set 2

Creates a member originating at a point and extends to a specified end condition.

Points

Select points in sketch.

Specifies end condition for a point length member.

Length	Defines a direction and a dimension for the length of a primary member.
Point	Extends a primary member from the start point to the end point. Click Chain Link to add members along a chain of points.
Up to Point	Extends a primary member up to the selected point.
Up to Plane	Extends a primary member from a point to a plane. The member extrudes in the direction of the reference plane.

Creates a member along the intersection of a face or surface, and a plane.

Faces
Intersecting Planes

Extends members from a starting location to an end point.

Divides a member into multiple separate members based on a Reference or a Dimension.

Reference	Splits members with an intersecting face, reference plane, or another member.
Dimension	Defines a split by Length and Number of Instances.