Sketched Bend PropertyManager

To create a sketched bend feature:

  1. Sketch a line on a planar face of the sheet metal part. Alternatively, you can select the sketched bend feature before you create a sketch (but after you select a plane). When you select the sketched bend feature, a sketch opens on the plane.
    SHM_sketched_bend_1.gif
  2. Click Sketched Bend Tool_Sketched_Bend_Sheet_Metal.gif on the Sheet Metal toolbar, or click Insert > Sheet Metal > Sketched Bend.
  3. In the graphics area, select a face that does not move as a result of the bend for Fixed Face PM_shm_Fixed_Face.gif.
  4. Click a Bend position of Bend Centerline PM_shm_Bend_Centerline.gif, Material Inside bend_pos_mat_ins.png Button, Material Outside bend_pos_mat_out.png Button, or Bend Outside bend_pos_out.png Button.
  5. Set a value for Bend Angle, and click Reverse Direction PM_reverse_direction.gif if necessary.
  6. Select Override value to override the preset Bend Angle. Override value is available if a sheet metal gauge table has been selected for the part.
  7. To use something other than the default bend radius, clear Use default radius and Use gauge table (if a sheet metal gauge table has been selected for the part), and set Bend Radius PM_fillet_radius.gif.
  8. To use something other than the default bend allowance, select Custom Bend Allowance, and set a bend allowance type and value.
  9. Click .
    SHM_sketched_bend_2.gif