Center Mark PropertyManager

To display the Center Mark PropertyManager:

In a drawing, click Center Mark (Annotations toolbar) or Insert > Annotations > Center Mark.

Style

Defines the center mark style. For details, see Style.

Auto Insert

For all holes	Options
For all fillets	Options
For all slots	Options Slot center marks Slot Centers Insert center marks into slot centers in straight slots Slot Ends Insert center marks into slot ends in straight slots Arc Slot Centers Insert center marks into slot centers in arc slots Arc Slot Ends Insert center marks into slot ends in arc slots

Options

Manual Insert Options

	Single Center Mark
	Linear Center Mark	Insert center marks into a linear pattern of circles or arcs. When a linear pattern is recognized, click Propagate to create center marks in all instances of the pattern. Connection lines. Connects the center mark symbols. Center marks propagated to a linear pattern Linear center marks with connections lines
	Circular Center Mark	Insert center marks into a circular pattern of circles or arcs. Options
	Slot center mark	Slot Centers Insert center marks into slot centers in straight slots Slot Ends Insert center marks into slot ends in straight slots Arc Slot Centers Insert center marks into slot centers in arc slots Arc Slot Ends Insert center marks into slot ends in arc slots
	Connection lines	Automatically adds connection lines for new center marks, when possible.

Display Attributes

Clear Use document defaults to change the following attributes set from Document Properties - Centerlines/ Center Marks.

Mark size	Mark size is the length from the center point to an end of the center mark.
Extended lines	Center points are center marks with Extended lines turned off. You can drag the extended lines to resize them. Selected Cleared
Gap	Gap is the distance between the center mark and the extension line. You can change the gap when Scale by view scale in Document Properties - Centerlines/ Center Marks is cleared. Selected Cleared
Centerline font	Selected Cleared

Angle

Angle

If the center mark is rotated because the view is rotated, the rotation angle appears here. A positive angle rotates the center mark counterclockwise.

Layer

Layer

In drawings with named layers, select a layer.